MULTI-BRANCH SYSTEMS


DESCRIPTION

    

Enables you to select the optimal consumables for your needs in microbiological analysis or particle count in Quality assurance.
  • Stainless steel AISI 304.
  • Available with 1, 3 or 6 branches.
  • Modular design to accommodate all types of filter holders: stainless steel ,plastic ,glass , polycarbonate.
  • Each filter unit can be individually sterilely vented (to avoid secondary contamination of the underside of the filter after breaking vacuum).
  • Special polished stainless steel surfaces allow easy cleaning & rinsing.
  • Long lifeclycle.


top ^


TECHNICAL SPECIFICATIONS

Stainless Steel quality B.S. 304S31 / AISI 304
Dimensions RF1S : 146 x 103 x 120 mm
RF3S : 435 x 103 x 120 mm
RF6S : 910 x 103 x 120 mm
Max. operating pressure Vacuum only
Sterilitation By autoclaving (max. 134 ºC)
By dry heat (max. 180 ºC)
By faming
By other methods acc. to ISO 8199
Materials Stainless Steel: lid, funnel, base part, filter support, clamp and tap.
Silicone flat gasket.
Silicone lid seal.
Flow rate per filter station for water at 90 % vacuum 200 ml/min with 0.2 um membrane filter
600 ml/min with 0.2 um membrane filter
Filtration area 12.5 cm²
Suitable membrane filter diameter 50 mm - 47 mm
Outlet spouts (individuals system) 10 mm outside diameter
Inlets ( branches only) Female threads, TR 20 x 2
Outlet (branches only) Hose nipple, DN 10


top ^


ORDERING INFO

RF1S Multi –branch system, 1 position
RF3S Multi –branch system, 3 position
RF6S Multi –branch system, 6 position

 

 

Ordering information of replacement parts for multi-branch system
REFERENCEPORE DESCRIPTION
JPT02025100 Filter for venting, PTFE, 0.2 um, 25 mm, 100 units
JPT012 Plug luer Lock to close the PTFE syringe filter if sterile venting
Is not required, 12 units
RFS225 Plug conical to close the venting hole beside the 3 way-
valve , if sterile venting is not required, 10 units
RF268 Knurled nut
RF267 Stainless steel 3- way tap
RF270 Stainless steel cap
RF271 Silicone O-ring 16 + 2 mm
RF272 Hose nipple


top ^