FILTER HOLDERS
GENERAL DESCRIPTION
 |
Specially designed for clarification and sterilisation of aqueous and aggressive samples. |
- Reusable
- Range of 4 types of filter holder, depending on the volume and type of sample to be filtered:
- For volumes up to 5 ml
- For volumes up to 100 ml
- For volumes up to 1.000 ml
- For large volumes (up to 50 l - up to 100 l)
DESCRIPTION · UP TO 5 ml
  |
|
- PTFE filter holders for solvents and chemicals
- Polycarbonate filter holders for aqueous solutions
TECHNICAL SPECIFICATIONS · UP TO 5 ml
PF-13-P |
PF-13-P |
|
| Material | Polycarbonate |
PTFE |
| Sealing | Silicone gasket 10/14.9 mm |
|
| Filter diameter (mm) | 13 |
13 |
| Filtration area (cm²) | 0.5 |
0.5 |
| Inlet connection | Luer lock |
Luer lock |
| Outlet connection | Luer slip |
Luer slip |
| Flow rate (1) ml/min | 18 (0.2 um) / 35 (0.45 um) |
10 (0.2 um) / 18 (0.45 um) |
| Hold-up volume (before/after bubble point) ml | 0.3/0.2 |
0.3/0.03 |
| Max. working pressure (bar) | 7 |
5 |
| Sterilisation | Autoclave at 121ºC |
Autoclave (121ºC or 134ºC) |
(1) Flow rate for water at Ap = 1 bar ( 100kPa, 14.5 psi)
ORDERING INFO · UP TO 5 ml
∅ 13 mm
DESCRIPTION · UP TO 100 ml
- Stainless steel filter holders for solvents and chemicals
- Polycarbonate filter holders for aqueous solutions
TECHNICAL SPECIFICATIONS · UP TO 100 ml
Material Sealing Filter diameter (mm) Filtration area (cm²) Inlet connection Outlet connection Flow rate (1) ml/min Hold-up volume (before/after bubble point) ml Max. working pressure (bar) Sterilisation
(1) Flow rate for water at Ap = 1 bar ( 100kPa, 14.5 psi)
ORDERING INFO · UP TO 100 ml
∅ 25 mm
DESCRIPTION · UP TO 1000 ml
- Stainless steel filter holders for solvents and chemicals
- Polycarbonate filter holders for aqueous solutions
TECHNICAL SPECIFICATIONS · UP TO 1000 ml
Material Sealing Filter diameter (mm) Filtration area (cm²) Inlet connection Outlet connection Flow rate (1) ml/min Max. working pressure (bar) Weight (g) Sterilisation
(1) Flow rate for water at Ap = 1 bar ( 100kPa, 14.5 psi)
ORDERING INFO · UP TO 1000 ml
UNITS / MATERIAL POLYCARBONATE PTFE 1 PF47P01 PF47A01 5 PF47P05
DESCRIPTION · LARGE VOLUMES
- For particle removal and for sterile filtration of several litres
- Up to 50 l: filter holder 142 mm
- Up to 100 l: filter holder 293 mm
- Chemical compatibility in accordance to the materials: stainless steel, PTFE, silicone and Viton.
- Two kinds of outlets:
- Barbed hose nipples (PF142A)
- Sanitary flanges (PF142ASA and PF293ASA)
- Sterilization : bay autoclaving (134ºC) or dry heat (180 ºC)
TECHNICAL SPECIFICATIONS · LARGE VOLUMES
Material Filter diameter (mm) Filtration area (cm²) Flow rate with 0.2 um (1) l/min Flow rate with 0.45 um (1) l/min Flow rate with 0.8 um (1) l/min Max. working pressure (bar) Sterilisation
ORDERING INFO · LARGE VOLUMES
DIAMETER (mm) 142 293
