PTFE SYRINGE FILTERS


DESCRIPTION

    

Recommend for HPLC and GC samples, sterilisation and clarification of most solvents and filtration of gases-venting.
  • Incorporated PTFE ( polytetrafluorethylene) membrane fixed without adhesive to a polypropylene housing.
  • Hydrophobic.
  • Very high flow rate.
  • High chemical resistance to most solvents and acids.
  • Free from wetting agents.
  • They must be pre-wetted with a solvent such as ethanol or isopropanol before filtering aqueous samples.
  • The filter diameter is related to the volume to be filtered:
    • <1 ml – 4 mm
    • <5 ml – 15 mm
    • <100 ml – 25 mm
  • Pore size 0.20 µm and 0.45 µm.
  • Sterilization by autoclaving at 121 ºC and ethylene oxide.


top ^


TECHNICAL SPECIFICATIONS

Material filter
Polypropylene-reinforced PTFE
Material house
Polypropylene
Pore
0.2
0.45
Filter diameter (mm)
15
25
4
15
25
Diameter filter (mm)
15
25
4
15
25
Housing diameter (mm)
25
33
12
25
33
Flow rate (1) ml/min
20
45
2
70
130
Flow rate (2) ml/min
55
160
4.5
150
260
Flow rate (3) ml/min
0.5
1.2
0.06
1.1
1.8
Bubble point (4) (bar)
1.4
1.4
0.9
0.9
0.9
Filter area (cm²)
1.7
4.8
0.07
1.7
438
Hold up volumen (before/after bubble point)
0.23 / 0.1
0.35 / 0.2
/ 0.005
0.23 / 0.1
0.35 / 0.2
Adsortion (5)
8µg/cm² with gamma globulin
Connectors
Female luer lock inlet
Male luer lock outlet
Max. operational pressure (bar)
4.5
4.5
4.5
4.5
4.5
Busrt pressure (bar)
6
6
6
6
6
Max. temperature (ºC)
121
121
121
121
121

 

(1) Flow rate for ethanol at Ap = 1 bar ( 100kPa, 14.5 psi)
(2) Flow rate for methanol at Ap = 1 bar ( 100kPa, 14.5 psi)
(3 )Flow rate for air at Ap = 1 bar ( 100kPa, 14.5 psi)
(4) Wetting fluid: Isoporpyl
(5) With a pore size 0.2 um

top ^


APPLICATIONS

  • Sterilisation and clarification of most acids and aggressive solvents
  • Degassing solvents
  • Ventingof containers, and sterile air, gas and aerosol applications
  • Protection within vacuum pump
  • Cleaning of small volume samples for HPLC and GC applications, which require greater chemical resistance than regenerated cellulose syringes (JCR)
  • Excellent for sterilisation and clarification of most solvents (such as acetone, dimethyl formamide or DMSO), and of very aggressive or acidic solutions.
  • Filtration and degassing of solvents before being analysed and venting of sterile containers.

top ^


ORDERING INFO

∅ units/Pore
0.20 µm
0.45 µm
4 mm 50
JPT045450
15 mm 100
JPT02015100
JPT04515100
500
JPT02015500
JPT04515500
25 mm 100
JPT02025100
JPT04525100
500
JPT02025500
JPT04525500


top ^