NYLON SYRINGE FILTERS
DESCRIPTION
 |
Recommended for analytical applications, filtration of samples and solvents for HPLC, under non-extreme conditions. |
- Incorporate Nylon membrane fixed without adhesive to a polypropylene housing.
- Hydrophilic
- Compatible with dilute organic solvents (such as acetone, methylene chloride and acetonitrile)
- Do not contain wetting agents
- Up to 100 ml of sample
- Pore size 0.20 µm and 0.45 µm
- Sterilization by autoclaving at 121 ºC and ethylene oxide.
TECHNICAL SPECIFICATIONS
| Material filter | Nylon (polyamide) |
|
|---|---|---|
| Material house | Polypropylene |
|
| Pore | 0.2 |
0.45 |
| Flow rate (1) ml/min | 50 |
80 |
| Bubble point (2) bar | 3.0 |
2.0 |
| Filter diameter (mm) | 25 |
25 |
| Housing diameter (mm) | 33 |
33 |
| Filter area (cm²) | 1.8 |
1.8 |
| Hold up volumen (before/after bubble point) | 0.3/0.1 |
0.3/0.1 |
| Adsorption (3) (for 0.2 µm) | 100 ug/cm2 with BSA |
|
| Max. operational pressure (bar) | 4.5 |
4.5 |
| Busrt pressure (bar) | 6 |
6 |
(1) Flow rate for water at Ap = 1 bar ( 100kPa, 14.5 psi)
(2) Wetting fluid: Isoporpyl alcohol
(3) For pores size 0.2 µm.
APPLICATIONS
- Filtration and clarification of small volumes
- Sterilisation of aqueous and dilute organic solvents
- HPLC: Filtration of aqueous and organic samples (the filtered samples ensures protection of the column).
ORDERING INFO
NON-STERILE
| units/Pore | 0.20 µm |
0.45 µm |
|---|---|---|
| 100 | JNY02025100 |
JNY04525100 |
| 500 | JNY02025500 |
JNY04525500 |
