CELLULOSE ACETATE SYRINGUE FILTER WITH GLASS MICRFIBRE
DESCRIPTION
![]() |
Recommended for clarification, purification and sterilisation of aqueous solutions and biological samples with high particle load.. |
- Incorporated Surfactant-free Cellulose Acetate membrane and a fine glass microfibre filter fixed without adhesive to a MBS polymerisate housing.
- Ready to use syringe filter.
- Hydrophilic.
- Low adsorption.
- High flow rates.
- High total throughput.
- Low hold-up volume.
- Minimun extractables.
- Up to 200 ml of sample.
- Large filtration area and an optimized geometry of the filter support.
- Pore size 0.20 µm to 1.2 µm
- Easy pore size identification by coloured houses
- Also available in individual sterile peel-packs
- Not autoclavable, only feasible sterilization by gamma irradiation or ethylene oxide.
TECHNICAL SPECIFICATIONS
| Material filter | Surfactant-free Cellulose Acetate membrane glass microfibre filter |
||
|---|---|---|---|
| Material house | Meta acrylate butadiene styrene polymerisate |
||
| Pore | 0.20 |
0.45 |
1.2 |
| Colour code | blue |
yellow |
red |
| Flow rate (1) ml/min | 60 |
160 |
400 |
| Bubble point | 3.2 |
2.0 |
0.7 |
| Filter diameter (mm) | 28 |
28 |
28 |
| Housing diameter (mm) | 33 |
33 |
33 |
| Filter area (cm²) | 6.2 |
6.2 |
6.2 |
| Hold up volumen (before/after bubble point) | 0.4/0.23 |
0.4/0.23 |
0.4/0.23 |
| Adsorption (2) | 0.8-3 ug/cm2 with BSA, 8-12 ug/cm2 with gamma globulin |
||
| Connectors | Female luer lock inlet Male luer lock outlet |
||
| Cytotoxicity | No inhibition with MRC-5 or L-929 cells |
||
| Endotoxins | < 0.06 EU/ml |
||
| Max. operational pressure (bar) | 4.5 |
4.5 |
4.5 |
| Busrt pressure (bar) | 6 |
6 |
6 |
| Max. temperature (ºC) | 50 |
50 |
50 |
| Sterilization methode in sterile version | Ethylene oxide |
||
(1)Flow rate for water at Ap = 1 bar ( 100kPa, 14.5 psi)
(2)For pores size 0.2 um
APPLICATIONS
- Sterile filtration of small volume liquids heavily contaminated.
- Ultra-cleaning, purification, particulate removal and clarification of liquids with high particle load.
ORDERING INFO
NON-STERILE
| PORE units/box | 0.20 µm |
0.45 µm |
1.20 µm |
|---|---|---|---|
| 100 | JACFV02025100 |
JACFV04525100 |
JACFV12025100 |
| 500 | JACFV02025500 |
JACFV04525500 |
JACFV12025500 |
STERILE
PORE units/box 0.20 µm 0.45 µm 1.20 µm50 JACFVS0202550 JACFVS0452550 JACFVS1202550

